Newcon Optik nvs 10mg Manuel D’Utilisation

9 

 
  Battery control module should be used for the field 

inspection of the batteries. It has four LEDs on the front 
panel. Numbers “1.1”, “1.2”, “1.3”, “1.4”, which are 
marked near the LEDs, indicate battery voltage in 
Volts. The accuracy of voltage measurement is 0.1 V. 

  The wrench key is designated for turning the windage 

screw (13). 

  The protected rubber eye shade from the accessories kit 

is used instead of the standard eye shade (16). It is 
designed for night work under conditions that require 
high level of camouflage. It hides the green light spot 
on the shooter’s face, when the shooter is not aiming. 

  The soft cloth is intended for cleaning of the external 

surfaces of optical components, contacts, and battery 
control module. 

  The bag is intended for packing up the sight and its 

protection while carrying and transporting. 

  The cover is used when the sight is transported being 

mounted on a weapon. 

  The accessories are stored inside the cover.