Zalman vf900 quiet dual heatpipe vga coolers Manuel D’Utilisation

※

The specifications of any product may change without prior notice to improve performance.

1

Cautions on Use and Installation

1. By installing this product on a VGA (Video Graphics Array) card, a PCI slot adjacent to the PCIe 

(or AGP) slot will become unusable. 

2. If this product will be installed on a recently released VGA card, please check for compatibility at

Zalman’s website first. 

3. The product cannot be installed on Matrox VGA cards, NVIDIA PCX 5    , NVIDIA Geforce 6600

AGP Series and ATI Radeon 9550/9600 Series.

4. If the VGA card and its components interfere with the installation of this product, stop the installation,

refer to the list of compatible VGA cards at Zalman’s website and install this product with one of 

the compatible VGA cards.

5. The use of an exhaust fan positioned on the rear side of the case is recommended for enhancement

of product performance. 

Product Features

1. Pure copper heatsink base and fins maximize cooling performance.
2. Use of two high performance heatpipes maximizes heat transfer.
3. Circular heatsink formed by radially aligned ultra-thin(0.2mm) fins minimizes airflow resistance 

and maximizes heat dissipation surface area for excellent cooling performance.

4. Fan installed in the heatsink cools not only the VGA chipset and VGA RAM, but all other VGA components.
5. Does not exert any excessive force on the VGA card due to the product’s light weight.
6. Improvement in the installation structure provides excellent compatibility and easy installation.
7. Adjustable fan speed controller(FAN MATE 2) enables control of noise and fan speed. 
8. Does not generate noise or vibration in Silent Mode.

Disclaimer

Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not 
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper 
installation, or improper testing.

❶ One (1) VGA Cooler
❷ Eight (8) RAM Heatsinks 
❸ Four (4) Nipples
❹ Four (4) Fixing Nuts
❺ One (1) PVC Washer Plate
❻ Four (4) Rubber Rings
❼ Four (4) Springs
❽ Thermal Grease
❾ FAN Controller(FAN MATE 2)
❿ Cable for FAN MATE 2

Dual-sided Tape

(to attach FAN MATE 2)

Manual

Components

***

MODEL  

SPEC.                  

96 (L) X 96 (W) X 30 (H)

185

Pure copper

Dimensions (mm)

Weight (g)

Cooling Material

VF900-Cu

- 

Size : 80(L) x 80(W) x 15(H)mm

- Bearing Type : 2-Ball Bearing 

- Speed : 1,350rpm 

10 % (Silent Mode) 

2,400rpm 

10 % 

(Normal Mode)

- Noise level : 18.5dB 

10 % (Silent Mode) 

25.0dB

10 % 

(Normal Mode)

Specifications