ZyXEL Communications omni.net LCD+M Manuel D’Utilisation

Page de 186
Technical Reference for ZyXEL omni.net series 
 
1-2
!  Two application program interfaces including ZyXEL ISDN AT Commands and CAPI
 
2.0. 
!  Built-in 56K modem that can communicate with other analog Modem/Fax through an 
ISDN line (for omni.net LCD+M only). 
Intelligent Features 
!  Automatic ISDN/analog call detection. 
!  Automatic dial-in and dial-out B-channel protocol detection. 
!  Supplementary Service for USA NI-1, DMS-100 switches and European DSS1 switch, 
including call waiting, call hold/retrieve, three-way conferencing, call forwarding, etc. 
!  Feature Phone operation, including call back, broker, and three-way conferencing, etc. 
!  Two analog telephone ports with metering pulse function. 
!  Callback security with password protection. 
!  Flash EPROM memory for easy firmware upgrades. 
!  Provides FSK/DTMF Caller ID signal on analog ports. 
Specifications 
 
Status Display 
Status LED, 20 x 2 LCD panel (LCD/LCD+M only) 
Flow Control 
Software XON/XOFF or hardware CTS/RTS 
Configuration Setting 
Software programmable with nonvolatile memory for profile storage 
Diagnostics 
Self and loopback tests 
Line Interface 
RJ-45 for S/T interface 
DTE Interface 
DB-25 connector 
Weight 
omni.net LCD: 448 g; omni.net LCD+M: 557g 
omni.net Plus: 379 g; omni.net D: 358 g 
Dimensions 
omni.net LCD/LCD+M: 192mm (W) x 42.5mm (H) x 145.6mm(L) 
omni.net Plus/D: 183mm (W) x 36.5mm (H) x 135.0mm(L) 
Table 1. Specifications