Konica Minolta pi8500pro advanced-inform 1.1.0 Manuel D’Utilisation

Installing the Printer Driver

Pi8500Pro

2-3

The printer driver requires setting items that are common to all print jobs, 
including the port to which the printer is connected and any optional 
devices configured with the machine. These settings must be made using 
tabs available in a Properties dialog box after the printer driver has been 
installed or whenever the operating environment changes.

The most common settings were made when the printer driver was 
installed, so you do not usually need to change them. Some items must, 
however, be changed in the following cases.

l

You want to add a comment to distinguish the printer 
from others.

General

l

The connection port has been changed on the 
computer.

l

You want to change the conditions for the display of a 
timeout error.

l

You want to designate a port to which the machine is 
connected via a network. (This setting must be made 
on a computer that is connected to the controller via a 
network.)

Details

l

The setting is not related to printing.

Color Management

l

You want to share the machine with other computers 
connected to the same network. (This setting must be 
made on the computer directly connected to the 
controller.)

Sharing

l

You want to change the setting in the Minolta 
Pi8500Pro PCL6 Properties dialog box. For details, see 
Chapter 3.

Setup
Paper
Quality
Device Options Setting
Job Management
Overlay