Konica Minolta pi8500pro advanced-inform 1.1.0 Manuel D’Utilisation
5
PageScope Light
5-2
Pi8500Pro
5.2
Access
PageScope Light can be accessed directly from a Web browser.
1
Start the Web browser.
2
In the Address Bar, enter the IP address of the printer controller as
shown below.
shown below.
http:// <IP address of printer controller>/
(Example) When the IP address of the printer controller is
192.9.200.200:
192.9.200.200:
http://192.9.200.200/
3
This causes PageScope Light screen to appear.
Operation
PageScope Light operation is identical to that for Internet Web pages.
Clicking a hot link jumps to the link destination, and the Back and
Forward buttons scroll through pages backwards and forward.
Clicking a hot link jumps to the link destination, and the Back and
Forward buttons scroll through pages backwards and forward.
If an error message appears due to an incorrect setting, click the Back
button to return to the previous page, and then try specifying the setting
again.
button to return to the previous page, and then try specifying the setting
again.
In addition, if the Minolta PageScope Light logo in the top-left corner of
the page is clicked, the Minolta Web site opens up in the browser.
the page is clicked, the Minolta Web site opens up in the browser.
Entering the Password
The Password input box appears in the page where PageScope Light
settings can be changed.
settings can be changed.
Type in the password here when a password is defined. Note that the
password is case-sensitive, so be sure to type in upper-case and lower-
case characters correctly. (The password you should type in here is the
same as the administrator password you created with Fiery WebTools.)
password is case-sensitive, so be sure to type in upper-case and lower-
case characters correctly. (The password you should type in here is the
same as the administrator password you created with Fiery WebTools.)