Konica Minolta k8020 Manuel D’Utilisation
2
2.2 Practical Copy Examples
2-10
Konica 8020/8031
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
2
To copy a postcard
An example for making a single-sided copy from a single-sided postcard onto a
postcard loaded into the manual bypass tray is described below.
postcard loaded into the manual bypass tray is described below.
Position the postcard document face down onto the
original glass.
When positioning the document, position it so that the
top is toward the rear of the copier.
original glass.
When positioning the document, position it so that the
top is toward the rear of the copier.
Touch [Paper].
Select the manual bypass tray.
Touch [A6Card].
The “Thick2” Paper setting is automatically selected.
The “Thick2” Paper setting is automatically selected.
Prepare one postcard.
Load the postcard into the manual bypass tray with
the top of the postcard entering the feed slot and the
side to be printed onto facing down. (The side where
the address is written should face up.)
Load the postcard into the manual bypass tray with
the top of the postcard entering the feed slot and the
side to be printed onto facing down. (The side where
the address is written should face up.)
Adjust the paper guides to the size of the postcard.
Lightly slide the postcard into the feed slot as much
as possible.
The postcard is fed in and copying begins.
as possible.
The postcard is fed in and copying begins.