Konica Minolta k8020 Manuel D’Utilisation
2
2.6 Making Copies Using Accounts
2-16
Konica 8020/8031
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
2
2.6
Making Copies Using Accounts
Using the “Copy Track” Function
The total number of copies allowed and the copies allowed for certain sizes can be
set for up to 99 accounts.
set for up to 99 accounts.
G
If the “Copy Track” function is used, printing is only possible by users who enter
their assigned access code.
their assigned access code.
❍
Copying cannot be performed by users who do not know the access code.
❍
For access codes, contact your administrator.
G
The access codes are set using the Administrator mode available from the Util-
ity screen. Settings should be made by the administrator.
ity screen. Settings should be made by the administrator.
❍
Settings cannot be made by anyone who does not log in using the adminis-
trator access code.
trator access code.
❍
For details on the administrator access code, contact the authorized service
representative.
representative.
To make copies when accounts are specified
1
If an access code has
been specified, a
screen appears, indi-
cating that the access
code must be entered.
been specified, a
screen appears, indi-
cating that the access
code must be entered.
2
Using the keypad, enter
the assigned four-digit
access code.
the assigned four-digit
access code.
3
Press the [ACCESS] key. The access code input screen
disappears, and the Basic screen appears.
disappears, and the Basic screen appears.
4
Make copies using the desired Copy mode settings.
5
After you are finished making your copies, press the [ACCESS] key.
The access code input screen appears again.