Konica Minolta k8020 Manuel D’Utilisation
3
3.5 Loading Paper
3-16
Konica 8020/8031
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
To select a stored non-standard (custom) paper size
1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Custom Size].
4
Touch either [1] or [2]
to select the stored
custom paper size.
to select the stored
custom paper size.
5
Touch [Enter], and
then touch [Enter] in
the Input screen.
then touch [Enter] in
the Input screen.
The paper size for the
1st drawer is set.
1st drawer is set.
Loading Paper Into the 2nd Drawer or a Paper Feed Unit
1
Pull out the paper drawer.
2
Press down on the paper-lifting
plate until it locks into place.
plate until it locks into place.
✎
Note
Be careful not to touch the sur-
face of the paper take-up roller
with your hands.
Be careful not to touch the sur-
face of the paper take-up roller
with your hands.
3
Remove the trailing-edge guide,
and then re-install it for the size of
paper to be loaded.
and then re-install it for the size of
paper to be loaded.
Paper take-up roller
4
3