Konica Minolta kn303ev2 Manuel D’Utilisation

Konica Network Interface Card INSTRUCTION MANUAL  2-13

Type a Domain Name Server IP address if necessary. Otherwise, you can leave this blank.

You do not need to type anything in this field. All values input will be disabled.

Checking this box allows the network interface card to automatically obtain an IP address from the

DHCP server. When you check DHCP, you either need to assign the IP address to 0.0.0.0 or uncheck

IP Address in NVRAM.

Check this box to enable the network interface card to store its IP address in NVRAM (non-volatile

memory).

Checking this box lets the main body printer print out LPD Banner page for each print job only for the

LPD/LPR printing.

Check the box corresponding to the desired printer language.

This lets the resident lpd/lpr modify files intended for other emulations so they can be printed. The

menu also allows you to enable or disable banners attached to lpd/lpr handled jobs.

The emulation choices are:

• PCL (Printer Control Language)

• PS (PostScript)

• ASCII (simple text)

• OTHER (any print job not recognized as PCL, PS, or ASCII)

The file modifications and conditions are:

PCL, (PS)

ASCII

<CR> changed to <CR><LF>

PS

PCL, Other

PostScript header added

not PS

PostScript

Job discarded

PS

ASCII

PostScript  header added, <CR> changed to <CR><LF>

PCL, PS, ASCII

any

No action

For each of the following items selected, click [Accept Settings] to continue with the setup process, or

click [Clear Inputs] to cancel the setup process.

To make new settings effective, be sure to reset the network interface card (restart the print controller

and the main body printer) after typing a password and clicking a designated button. A default pass-

word is [sysadm].