Fujitsu softune f2 mc-16 Manuel D’Utilisation

280

CHAPTER 2  DEPENDENCE FUNCTIONS

■

The emulator debugger allows the debug functions to be selectively used by effecting mode switching

correspondingly to the usage.

The mode has two types described below.

•

Execution time mode

This mode selects the method of measuring the user-program execution time.

- Time measurement mode (default) 

This mode measures the time from the start of execution to the break occurrence.

- Performance mode

This mode measures the time between specified two events (points).

•

Pass count mode

This mode selects the using method for the pass count function.

- Sequential mode

This mode uses the sequential function.

The pass count break cannot be used.

- Pass count break mode (default)

This mode uses the pass count break.

The sequential function cannot be used.

■

Methods of switching to the execution time mode and the pass count mode are described below.

●

Dialog-used switching

Select the [Setup] - [Debug environment] - [Debug environment] menu, and then select the [Event] tab.

For details, refer to "4.7.2.3 Debug Environment" in "SOFTUNE Workbench Operation Manual".

●

Command-used switching

Execute the SET MODE command.

For details, refer to "1.9 SET MODE (type 2)" in "SOFTUNE Workbench Command Reference Manual".