Lenmar Enterprises BCR06 Manuel D’Utilisation

NoMEM Batteries 
NoMEM batteries cannot be discharged and MUST be stored fully charged.  If you discharge a NoMEM battery it will 
diminish its capacity and/or not fully charge up again.  For this reason, NEVER use the Discharge / Charge feature when 
charging NoMEM batteries. For NoMEM batteries, use the Charge Only feature. To keep your NoMEM batteries fresh and 
to prolong their life, they should be fully recharged as soon after each use as possible. They should also receive a fresh 
charge after every 4-6 months of storage or non-use. 
 

 
CHARGE ONLY MODE (for NoMEM batteries) 
Plug the appropriate power adapter into the base module, insert the battery to be charged. The red CHARGE indicator 
should light. When the Red light goes out, your battery is fully charged.  
NOTE: Never press the DISCHArge button while a NoMEM battery is inserted in the base module! 
 
DISCHARGE / CHARGE MODE (for Ni-Cad type batteries) 
Plug the appropriate adapter into the base module, and insert the battery to be charged. The RED CHARGE indicator 
should light. Press the DISCHARGE button at the top of the base module until the green DISCHARGE light goes on. The 
green light will stay on until the battery is fully discharged, then the red indicator will light showing that the battery is now 
being charged. When the red light goes out, your battery is fully charged.  
 
DISCHARGE ONLY MODE (for Ni-Cad type Batteries) 
Insert your 6 Volt camcorder battery into the base module and press the DISCHARGE button on the top of the base 
module until the green DISCHARGE indicator light goes on. The green light will turn off    when the battery is fully 
discharged.  
 

 
POWER SOURCE 
• 

AC Adapter - Output 13.5 VDC - 1A 

• 

12 Volt DC Cigarette Adapter - Not to exceed 15 VDC 

 
CHARGING CIRCUIT 
• 

Microprocessor Controlled Switching Type 

 
CHARGING MODE 
• Current 

 

850mA 

Constant 

• 

Time  

1 to 2 Hours (Varies With Battery Capacity  
and Charge Condition) 

• 

Detection  

-DV & 0DV 

• 

Protection  

Max. Voltage, Time, and Temperature 

 
DISCHARGING MODE 
• 

Current 

360mA  +/- 20mA 

• 

Cut Off 

1V / Cell 

 

 
This limited warranty starts from the date of original purchase and expires 3 years thereafter. If, during this period, any 
part, because of manufacturing defects or workmanship fails to function properly under normal use will be repaired at no 
charge for parts and labor or, at our option, the product will be replaced.  The following is excluded: damages from delay 
or loss of use of equipment, or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, 
modifications, or accident. 

Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it 
prepaid and insured to: 

LENMAR ENTERPRISES INC. USA , 4035 Via Pescador  
Camarillo, CA 93012 

When sending in product for service, your package should include evidence of date and place of purchase.  Enclose 
$10.00 for shipping and handling for addresses in the U.S. For outside the U.S. and Canada, freight will vary depending 
upon ship to address. 

 

 
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel 
Environmental Justice Foundation against multiple electronics and appliance manufacturers. 
 
WARNING:  Handling the cord on this product will expose you to lead, a chemical known to the state of California to 
cause birth defects or other reproductive harm.  Wash hands after handling.