Funai drv-b2734 Manuel D’Utilisation

27

EN

Before recording on a DVD, you can confirm the 
quality of the picture and sound with the recording 
speed you selected.

The TV will display the programme and output the 
sound you are about to record in the quality of the 
picture and sound (determined by the recording 
speed) you selected.

• If you want to change the recording speed (to 

improve the recording quality), press 
[REC SPEED] repeatedly.
The recording speed is changed each time you 
press the button.

• You cannot change the recording speed during 

recording.

• If you press [REC MONITOR] while receiving the 

bilingual broadcast, the sound to be recorded is 
output.

This is a simple way to set the recording time in blocks 
of 30 minutes. Check that the disc you are recording 
onto has enough space remaining for the time you 
set.
When the recording finishes the recorder 
automatically switches to the timer-standby mode.

Make sure that the TV input is set on the unit.

(See page 22.)

Make sure that the recording format is set to the 
desired mode (see page 24).

U / D] or 

One-touch timer recording will start.

• When the unit reaches the specified time, it will 

be turned off automatically.

• To change the recording length during one-

touch timer recording, press [REC / OTR] 
repeatedly until the desired length appears.

• To cancel one-touch timer recording within the 

specified time, press [STOP 

S].

• The remaining recording time will appear on the TV 

screen during one-touch timer recording. Press 
[DISPLAY] to see it on the TV screen.

• The remaining recording time will be displayed on 

the front panel display during one-touch timer 
recording.

• Unlike timer recording, you can perform the 

following operations during one-touch timer 
recording. 
- Turn off the power.
- Use [REC / OTR] or [STOP 

S].

 1H(XP)  

DRV_B2737_B2734.book  Page 27  Thursday, March 31, 2005  10:04 PM