Daewoo dsc-3220e-3220l Manuel D’Utilisation

-64-

. If the TV set was on normal run mode before switching off, the microcontroller delivers horizontal drive voltage at pin

24 and picture appears on screen.

. If the TV set was on stand-by mode before switching off, the microcontroller switches TV set to stand-by mode,

decreasing power pin voltage (pin 1).

Depending on remote control commands, I501 microcontroller part pin 1 (power) is set to :

- high for normal run mode
- low for stand-by mode

a) TV on normal run mode

* I501 microcontroller part pin 1 (power) effect

I501 microcontroller part pin 1 (power) is connected to the following circuit :