Dakota Digital lat-nr180 Manuel D’Utilisation

LAT-NR180 

LED Tail Lights for 1968 Chevelle 

 

MAN#650179 

1.  Remove the chrome tail light cover.  There are four nuts on the back of the housing. 
2.  Remove the tail light lens. 
3.  Remove the light bulb. 
4.  Remove the original bulb connector from the back side of the housing. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
  

     

5.  Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is 

recommended. 

6.  Remove the nuts and back plate from the back of the new LED assembly. 
 

   

 

 

 
7.  Insert the new LED assembly into the hole where the original bulb 

and connector were located.  Use caution when feeding the wires 
through the socket opening to avoid damaging the wire insulation. 

 
 
 

 

MAN#650179