Clifford 590.4x Manuel D’Utilisation

51

© 2011 Directed Electronics. All rights reserved.

1-W

ay

ton for 3 seconds. The remote flashes the LED and beeps once or 
twice to indicate the selected Car is 1 or 2, release the button for Car 
Select or continue to hold for programming. 

Release the

button, then press and release while the LED and 

beeps continue to perform Car Select. Once the car is selected a com-
mand can be performed by pressing one of the command buttons.

* See 

 for more details . 

Programming

To enter; hold the

button for 8 seconds, the remote emits one long 

beep and turns the LED on, the programming main menu has been 
accessed. 
To exit; press and release the

button to go back and repeat to exit. 

1 short and 1 long beep is emitted for each step back, the LED turns 
off when programming is exited.

Sensor Adjust
The

button is used for sensor adjustment, to avoid unintended 

alarm triggers, it is recommenced that an authorized Directed 
dealer perform all sensor adjustments.

Remote Features menu
Press and release the

button, 2 LED flashes and beeps indi-

cate the remote features menu is accessed and can be set. Press 
buttons indicated below, 1beep and flash turns the feature on, 2 
beeps and flashes turns the feature off.
s

Autolock feature: Press 

 to turn on/off.

s

Remote Beeps: Press 

 to turn on/off.

s

Car 2 feature: Press 

 to turn on/off.