Delorme pn-60w Manuel D’Utilisation

83

 

 From the drop-down list for each of the following 

options, select the sound you want to use or turn it 

off.

» Sounds

» Button Press

» Message

» Power

» Turn Alert

 Volume–To adjust the volume, use the arrow keypad 

to move the slider right or left.

Use the Time options to modify the device’s time format, 

time zone, and Daylight Saving Time preferences.

From the Settings Page, select Time, and then select 

the option you want to change. 

 Time Format–From the drop-down list, select Local 

12 hr or Local 24 hr.

 Zone–From the drop-down list, select your actual 

time zone or select Automatic to allow the device 

to update the time based on your GPS location.

 Use Daylight Saving Time–Select the check box 

to adjust the time for Daylight Saving Time.

Use the Units option to set the units of measure for 

the device.

From the Settings Page, select Units, and then select 

the option you want to change.

From the drop-down list for each of the options, select 

the unit of measure you want to use:

 Coordinates: Primary–Degrees; Degrees, Minutes; 

Deg, Min, Sec; UTM/UPS; or USNG/MGRS.

 Datum: Primary–Various. The default datum 

is WGS84.

 Coordinates: Secondary–UTM/UPS; Degrees; 

Degrees, Minutes; Deg, Min, Sec; or USNG/MGRS.

 Datum: Secondary–Various.

 Measures–Statute Miles, Kilometers, Nautical Miles/

Feet, or Nautical Miles/Meters.

 Pressure– Inches of Mercury, Millibars, or Pascals.

 Bearing–True or Magnetic. True represents the 

true location of the North Pole. Magnetic sets the 

device to use magnetic bearings; this is useful when 

comparing the device with a digital compass for use 

with maps that have magnetic declination built into 

the map grid. 

The Settings Page