Navman 5605 Manuel D’Utilisation

Page de 68
TRACKER 5505/5505i/5605 Installation and Operation Manual
53
NAVMAN 
Black
White
Optional sensors and instruments
Fuel sensors: These optional fuel flow sensors 
can be fitted to up to two engines:
•   Navman petrol/gasoline sensors (see 
section 15-6).
 
Engine types supported:
 
Outboard carburetted two stroke and 
EFI petrol/gasoline engines: 50 to 300 
hp.
 
Outboard four stroke petrol/gasoline 
engines: 90 to 300 hp.
 
Inboard petrol/gasoline engines: 70 to 
400 hp.
 
Flow rate (per engine):
 
Minimum: 5 litres per hour (1.3 U.S. 
gallons per hour).
 
Maximum: 130 litres per hour (34 U.S. 
gallons per hour).
•  Navman diesel sensors (see section 15-7) 
Flow rate (per engine):
 
Minimum: 25 litres per hour (6.5 U.S. 
gallons per hour).
 
Maximum: 400 litres per hour (104 U.S. 
gallons per hour).
•   SmartCraft fuel sensors (see section 15-8)
Connections
GPS antenna (TRACKER 5505, 5605, 15-5)
Power (15-4)
External alarms (15-4)
NavBus instruments (15-9)
NMEA out to instruments (15-10)
Petrol/gasoline sensors (15-6), 
NMEA in (15-9)
Diesel sensors (15-7)
Power/data cable
Pin    Wire 
Function
Black 
  Ground: - power in, NMEA ground. (The cable has two black wires which are 
 
 
  connected inside the cable and it does not matter which black wire you use)
Brown    Power out, 9 V DC (not used)
White    NMEA out
Blue 
  NavBus- 
Red 
  + power in, 10.5 to 32 V DC
Orange    NavBus+
Yellow    Auto power in
Green    External alarm out, 30 V DC 200 mA maximum. 
Display unit 
(15-3)
www.Busse-Yachtshop.de      email: info@busse-yachtshop.de