Furuno back gp-80 Manuel D’Utilisation

Lighthouse data can be downloaded from a
personal computer, through the DATA 4 con-
nector.

1) Press [MENU ESC]  [9] and [5].

2) Press ▲ or ▼ to select Level.

3) Press t or s to select level of personal

computer; RS232C or RS422.

4) Press the [NU/CU ENT] key.

5) Press s to select Com.

6) Press ▼ to select To Next Page. The DATA

4 I/O SETUP menu appears.

7) Press ▲ or ▼ to select Baud Rate.

8) Press t or s to select  baud rate; 4800bps,

9600bps, or 19200bps.

9) Press the [NU/CU ENT] key.

10) Press t to select L.House.

11) Press ▼ to select Command. Stop, on the

same line as Command, appears in reverse
video.

12) Press s to select Start. The message

shown in Figure 8-13 appears.

13) Press the [NU/CU ENT] key. The mes-

sage shown in Figure 8-14 appears while
data is being loaded.

14) Operate the computer to output data.

When data is loaded, the cursor shifts to
Stop.

15) Press the [MENU ESC] key.

1) Press the [MENU ESC] key. The message

shown in Figure 8-15 appears.

2) To quit loading, press the [NU/CU ENT]

key. The cursor shifts to Stop.

3) To start loading, select Start.

4) Press the [NU/CU ENT] key.

To view lighthouse/bouy data on the display,
place the cursor on the lighthouse mark. Data
of the lighthouse/buoy appears at the top of
the display.

To Previous Page

Baud Rate               9600 bps

Load Data            L.House    WPT/RTE   WPT

Command            Stop          Start

Save Data            WPT/RTE

Command            Stop          Start

DATA 4 I/O SETUP  <Com.>    2/2

MENU : Escape

ENT : Enter

 :  Select

Load Data

L.House

Loading erases current data

Are you sure to load ?

ENT: Yes      MENU:No

Now loading

Light House data !

MENU:Stop

Are you sure to stop ?

ENT: Yes      MENU:No