Furuno back gp-80 Manuel D’Utilisation

The GP-80 has two memories: GPS memory
and plotter memory.

The plotter memory holds plotted track and
mark data. When you clear the plotter
memory, all track and marks are cleared and
all corresponding defaults settings are re-
stored.

1) Press [MENU ESC]  [9] and [9] to dis-

play the CLEAR MEMORY menu.

2) Press ▲ or ▼ to select Clear Plotter.

3) Press s to select Yes. The following mes-

sage appears.

4) Press the [NU/CU ENT] key.

The GPS memory stores GPS information,
including the Almanac. When you clear the
GPS memory, all GPS information is erased.

1) Press [MENU ESC]  [9] and [9] to dis-

play the CLEAR MEMORY menu.

2) Press ▲ or ▼ to select Clear GPS.

3) Press s to select Yes. The following mes-

sage appears.

4) Press the [NU/CU ENT] key.

To clear both GPS and plotter memories;

1) Press [MENU ESC]  [9] and [9] to dis-

play the CLEAR MEMORY menu.

2) Press ▲ or ▼ to select Clear All.

3) Press s to select Yes. The message shown

in Figure 9-4 appears.

4) Press the [NU/CU ENT] key.

Note: The equipment may lock after clearing the
GPS and plotter memories. Reapply power to the
equipment to restore normal operation.

Setting for cold start

Are you sure to clear ?

  ENT:Yes    MENU:No

Setting for default

Are you sure to clear ?

  ENT:Yes    MENU:No

Clear Plotter      No        Yes

Clear GPS         No        Yes

Clear All             No        Yes

CLEAR MEMORY

 Clear GPS

MENU : Escape

 :  Select

No

Clear tracks and marks

Are you sure to clear ?

  ENT:Yes    MENU:No