Fujitsu 50FH5037E-02 Manuel D’Utilisation
6.3
Command
Commands sent from the host machine to the scanner are as listed in Table 6.2.
Table 6.2 Commands
Command name
Command
code
Details
CLEAR
44
This command initializes the scanner.
This command can be issued at any time.
This command can be issued at any time.
CONTROL
58
This command sets the operation mode of
the scanner and the operation mode in the
main window.
the scanner and the operation mode in the
main window.
IMAGE
CONTROL
CONTROL
5A
This command sets the image processing
mode of the scanner.
mode of the scanner.
SUB WINDOW
CONTROL
CONTROL
5C
This command sets the subwindow
attribute of the scanner.
attribute of the scanner.
START
53
This command reports the size of a
document to be read.
document to be read.
READ
54
This command starts reading. The
scanner starts reading according to the
operation mode set previously.
scanner starts reading according to the
operation mode set previously.
SENSE
41
This command requests a scanner status
report.
report.
RETURN
SENSE
SENSE
42
This command requests a status report on
the return of the flatbed scan.
the return of the flatbed scan.
IMAGE MODE
SENSE
SENSE
43
This command requests a status report of
the image processing mode of each main
window and the number of pixels (in units
of a byte) per line in the X>direction.
the image processing mode of each main
window and the number of pixels (in units
of a byte) per line in the X>direction.
SEND DITHER
46
This command transfers the dither and
overlay patterns.
overlay patterns.
SEND DITHER2
47
This command transfers the dither, d
curve, or overlay patterns.
curve, or overlay patterns.
6 $ 4
50FH5037E>02