Fujitsu 50FH5037E-02 Manuel D’Utilisation
6.3.5
START command
When the scanner receives this command, the scanner reports the size of document
being read.
being read.
Byte 1
CNT
Byte 2
CMD
Byte 3
and later
X©02π
X©53π
$
6.3.6
READ command
When the scanner receives this command, the scanner starts reading based on the
previously set operation mode.
previously set operation mode.
Issuing the response other than Read Complete during read operation causes error.
Byte 1
CNT
Byte 2
CMD
Byte 3
and later
X©02π
X©54π
$
6.3.7
SENSE command
When the scanner receives this command, the scanner reports the scanner status.
The Sense command can be issued at any time if another command does not require
the response from the scanner.
the response from the scanner.
Byte 1
CNT
Byte 2
CMD
Byte 3
and later
X©02π
X©41π
$
6.3.8
RETURN SENSE command
By this command, the scanner reports that the carrier unit has come back to the
home position.
home position.
Byte 1
CNT
Byte 2
CMD
Byte 3
and later
X©02π
X©42π
$
50FH5037E>02
6 $ 45