ZyXEL Communications prestige 314 plus Manuel D’Utilisation

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

Firmware and Configuration Maintenance 

12-9 

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open”, followed by a space and the IP address of your Prestige.  

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter your password as requested (the default is “1234”). 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Find the “rom” file (on your computer) that you want to restore to your Prestige. 

Step 7.  Use “put” to transfer files from the Prestige to the computer, for example, “put config.rom rom-0” 

transfers the configuration file on the Prestige to your computer and renames it “config.rom”. See 
earlier in this chapter for more information on filename conventions. 

Step 8.  Enter “quit” to exit the ftp prompt. The Prestige will automatically restart after a successful 

restore process. 

 

 

Menu 24.6 -- System Maintenance - Restore Configuration 

To transfer the firmware and configuration file to your workstation, follow the 
procedure below: 

 

1. Launch the FTP client on your workstation. 

2. Type "open" and the IP address of your router. Then type "root" and 

  SMT password as requested. 

3. Type "put backupfilename rom-0" where backupfilename is the name of 
  your backup configuration file on your workstation and rom-spt is the 

  remote file name on the router. This restores the configuration to 

  your router. 

4. The system reboots automatically after a successful file transfer 

 
For details on FTP commands, please consult the documentation of your FTP 

client program. For details on backup using TFTP (note that you must remain 

in this menu to back up using TFTP), please see your router manual. 

 

 

Press ENTER to Exit: