Navigon 21xx max Manuel D’Utilisation

User’s Manual NAVIGON 21xx max 

- 22 - 

Navigation  

When you have reached your selected destination, a message to this 
effect will be displayed. 
Only your current position (orange arrow) will now be shown on the 
map. 

You have switched on the navigation device and, if necessary, entered 
the password. The S

 window is open. 

1.  Tap on Navigation. 

The navigation application will be started. When you start the 
navigation application for the first time, the following message will 
appear: 

"Please note that the road traffic regulations are prior to the 
instructions of the navigation system. Please do not operate the 
device while driving." 

2.  After you have read and fully understood the message, tap on OK.  

If you do not accept the content of the message, tap on Cancel in 
order to close the navigation application. 

The N

 window is opened. From here you can access all 

the functions of the navigation application. 

► 

NAVIGON 2150 max: Tap on 

 (Phone) in order to move 

the hands-free module into the foreground. 

► 

Tap on 

 (Back) in order to move the S

 window back 

into the foreground. 

As soon as the navigation device has been switched on, initialisation of 
the GPS receiver will begin. 
The integrated GPS receiver is not initialised for the first time until the 
navigation application is started for the first time. It can take up to 
20 minutes to initialise the GPS receiver for the first time. 

 

Note: If the GPS icon indicates GPS Ready after far less than 
20 minutes, it is advisable to leave the navigation device switched on 
for at least another 15 minutes in order to ensure reliable operation of 
the receiver. 

 

Each time you switch on the navigation device after this, GPS reception 
will start within a short time. 
If the navigation device has not been switched on for more than a week, 
it can take up to 10 minutes to re-initialise the receiver.