Ford 2007 focus Manuel D’Utilisation
Replacing high-mount brake lamp bulbs
Sedan
1. Make sure the headlamp control
is in the OFF position and open the
luggage compartment.
is in the OFF position and open the
luggage compartment.
2. Pull the bulb holder from the
lamp assembly.
lamp assembly.
3. Pull the bulb straight out.
Install in reverse order.
3dr & 5dr and wagon
1. Make sure the headlamp control
is in the OFF position.
is in the OFF position.
2. Remove the screws using a Torx
T20 screwdriver and then remove
the plastic cover.
T20 screwdriver and then remove
the plastic cover.
3. Unclip the bulb holder from the
reflector.
reflector.
4. Pull the bulb straight out.
Install in reverse order.
Replacing license plate lamp bulbs
1. Make sure the headlamp control
is in the OFF position.
is in the OFF position.
2. Insert a flathead screwdriver in
the recess and pry out the complete
light assembly.
the recess and pry out the complete
light assembly.
3. Pull the bulb straight out.
Install in reverse order.
2007 Focus (foc)
Owners Guide (post-2002-fmt)
USA (fus)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
37