Fujitsu deskpower 6000 Manuel D’Utilisation

34

●

Using submenus, set the type of hard disk (master or slave) mounted on the primary IDE
connector (Adapter 0) and secondary IDE connector (Adapter 1) as well as the size and
the number of cylinders).  Move the cursor to a desired item and press the Enter key to
display the selected submenu.

– Type

Set the type of IDE device. A value other than [Auto] requests the user to enter
[Cylinders], [Heads], and [Sectors].

- Auto (Initial value)

The computer automatically sets the type of IDE device. Select this item when the
user-skip IDE device is setup.

- None

Select when no IDE device is used.

- Hard Disk

Select for setting details on the hard disk drive.

- CD-ROM

Select when a CD-ROM drive is connected.

- LS-120

Select when a super disk is connected.

- Other ATAPI

Select when any other ATAPI device is connected.

- To change the type, select with the space key.
- Usually, select [Auto]. If any other value is selected, set a correct value supported by the

connected device, otherwise the computer may not access the device correctly.

For details, consult the manual included with the device.

– Maximum Capacity

This item displays the maximum capacity of the hard disk drive only when Type is [Auto]
and [Hard Disk] is selected (if a hard disk unit is mounted).

Help

↑↓

Select Item

Change Value

Setup Defaults

Exit

←→

Select Menu

Select 

:

Sub-Menu

Save and Exit

PhoenixBIOS Setup Utility

Main

Advanced

Security

Power

Boot

Info

Exit

Primary Master [FUJITSU MHA2032AT]

Type:

[

]

Cylinders:

[13328]

Heads:

[ 15 ]

Sectors:

[ 63 ]

Maximum Capacity:

[6449 MB]

Multi-Sector Transfers: [16 sectors]

LBA Mode Control:

[Enabled]

Transfer Mode:

[Fast PIO 4]

DMA Mode:

[Ultra DMA 2]

Item Specific Help

Select ATA/ATAPI

drive installed

here.

[Auto]

The BIOS auto-types

the drive on boot

time.

Except [Auto]

You enter parameters

of the drive.

[None]

The drive is

disabled.