Fujitsu deskpower 6000 Manuel D’Utilisation

68

This section provides a list of error messages and suitable responses thereto. Consult this
section as required.

○

○

○

○

○

○

An error occurred at address

xxxx during a system memory

test.

An error occurred at address

xxxx during an additional

memory test.

An error occurred during a

keyboard controller test.

An error occurred during a

keyboard test.

An error occurred during a

floppy disk drive test.

If an extended RAM module is used, remove the

module and determine whether the error recurs. If this

message is not displayed, an extended RAM module

error is expected. Replace with another extended

RAM module and determine whether the error recurs.

If the error recurs, contact a dealer or the your local

distributor.

Confirm that the extended RAM module is mounted

properly and is a Fujitsu product. If the error recurs,

contact a dealer or the your local distributor.

Set the MAIN switch to OFF, then wait ten seconds

and set to ON again. If the messages is still played,

contact a dealer or your local distributor.

If an external keyboard is connected, confirm that it is

connected correctly and turn on the power again. If

this message is still displayed, contact a dealer or the

your local distributor.

Confirm that ‘Floppy Disk Drive A’ is set properly on

the BIOS setup main menu and that the floppy disk

drive is mounted correctly. If this message is still

displayed, contact a dealer or the your local

distributor.