Fujitsu deskpower 6000 Manuel D’Utilisation
83
Appendix
*1
To successfully operate the network at 100 Mbps, use an unshielded twisted pair cable
(UTP) with a data grade of category 5 or higher. If a cable classified as category 3 is
used, data is lost.
(UTP) with a data grade of category 5 or higher. If a cable classified as category 3 is
used, data is lost.
*2
The hub unit is a concentrator of 100BASE-TX/10BASE-T.
○
○
○
○
○
○
Sound specifications
○
○
○
○
○
○
○
LAN adapter specifications
- The factory-set IRQs and I/O port addresses of the PC have been set to the
value in < > in the above table.
- Although “Joystick” is displayed in the device manager of Windows 95/98, it
cannot be used with this PC because the joystick connector is not provided in
your PC.
your PC.
LAN controller
Send and receive buffer
RAM
External interface
Transmission media
Transmission method
Access method
Data transfer speed
Wiring mode
Maximum segment
length
Maximum number of
nodes/segment
Intel S82559
3 kB each for send and receive
ISO8802-3 100BASE-TX/10BASE-T
Twisted pair cable*
1
(100 Mbps: Category 5, 10 Mbps: Categories
3 to 5)
Base band
CSMA/CD
100Mbps, 10Mbps
Star type
100m
Depends on the hub unit*
2
Product name
MPU-401
Joystick
Interrupt
request level
Sampling rate
Manufactured by Crystal
300h-301h to <330h-331h> to 3FEh-3FFh
<200h-207h>, 208-20Fhl)
IRQ <5>, 7, 9, 11, 12, 15
5 to 48 kHz
Sound section