Farallon Communications netline usb 10-100 Manuel D’Utilisation
12 Chapter 3
LED Blinking:
The indicator blinks
green when data is received on the
100Mbps network and blinks yellow
when data is received on the
100Mbps network.
100Mbps network and blinks yellow
when data is received on the
100Mbps network.
LED Off:
If the LED is off, and you have
a network cable connected to the
adapter, it may indicate one of the
following:
adapter, it may indicate one of the
following:
■
The network cable is not properly
connected or is faulty.
connected or is faulty.
■
No 10Base-T or 100Base-TX
device is connected at the other
end of the network cable.
device is connected at the other
end of the network cable.
■
The network cable exceeds 100
meters.
meters.
■
The device is not receiving power
from a USB por t or there is no
USB suppor t on your system.
from a USB por t or there is no
USB suppor t on your system.
■
You are using a straight-through
10Base-T or 100Base-TX cable to
connect directly to another work-
station.
10Base-T or 100Base-TX cable to
connect directly to another work-
station.
■
You are using a cross-over cable
to connect to a hub.
to connect to a hub.