Haier xqb42-62 Manuel D’Utilisation

Page de 20
Before Using 
Before Using 
Safety precautions
Please insert the power cord into special rece-
ptacle with rated voltage.If the power cord is
three-phase wire,please use three-phase rec-
eptacle.The earthing terminal of the receptacle
must be earthed reliably.If it is two-phase wire,
please guarantee that the earthing wire is ear-
thed reliably.If possible ,please adopt electric
leakage protector.
Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or
nip it with weight.If  the power cord or the power plug is bad, or the power plug becomes 
flexible,to avoid risk it is required to have it replaced  by  the technicians of  our  special 
shop or  the  after-sale service department. Keep the pin of the power plug clean,if the 
power plug is polluted with dust,please wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand 
while the washing machine runs normally.
Be sure to pull the plug out and close the 
water tap when the machine is idle,when
moving  the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the 
plugging into the receptacle is loose, do not use the plug any more.
Do not wash water-proof laundries like the raincoat,
 bike covers etc. to avoid abnormal vibrations in spinning.
Do not use water hotter  above  50 C .
Do not put the machine at damp place like 
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
soft items
The ventilation holes
 at the bottom