Manualsbrain.com
  1. Manuels
  2. Marques
  3. Golden Technologies
  4. GP600 CC
  5. Manuel D’Utilisation

Golden Technologies GP600 CC Manuel D’Utilisation

Télécharger
Page de 40
Compass Owner’s Manual – Models GP600 SS, GP600 CC                                                                                                           Revised 052313 
 
16
ASSEMBLY  
BATTERY INSTALLATION
 
 
 The batteries weigh 24 to 39 pounds each (depending on type).  
Please ask for help if you do not feel capable of safely lifting that much weight. 
  
         
                
 
      Figure 7 
 
 
 
                Figure 8 
                                                         
         
            
 
                         Figure 9a                                                 Figure 9b 
 
 
Make certain that the controller power is turned off and that the chair 
is NOT in freewheel mode before attempting to perform assembly or disassembly. 
                                 
1. Place the batteries in the battery box. Be certain to position the terminals on each      
battery toward the front of the unit as shown in Figure 7. Secure the batteries in 
place using the hook and loop straps.  
2. Use the screws, washers, and nuts provided to connect the positive (red booted) 
connector of each cable to the positive (+) terminal of each battery. See figure 8.  
3. Use the screws, washers, and nuts provided to connect the negative (black booted) 
connector of each cable to the negative (-) terminal of each battery.  
4. Connect the connectors of each battery cable to the corresponding connector on the    
    main wire harness.  See figure 9a for NF22, figure 9b for U-1.  
5. Cover the battery terminals with the protective caps provided. See figure 9a for NF22, 
figure 9b for U-1.