fisher--paykel dd605 Manuel D’Utilisation

599464 

 

14

The DishDrawer™ is still in the Showroom wash mode however, and it can be 

re-run by pressing POWER and then START/PAUSE.  Once show 
off/showroom wash mode has been initiated, the mains power must be 
removed to exit out. 

Once in showroom mode, pressing the START/PAUSE button for 3 seconds 
will start a tune playing.  Pressing the START/PAUSE button again will toggle 
the tune between Bach and the Star Spangled Banner.  This feature is not 
widely known about, may not be present in all models and may be removed in 
future products. 

Press and hold KEYLOCK, then START/PAUSE for 5 seconds. 
All LEDs & LCD segments except Keylock are illuminated. 
Press START/PAUSE. 
This initiates pen data download via the lower tub-home light pipe.  At the 
same time the current and then the previous fault code will be displayed in 
the LCD screen and on the secondary control panel LEDs.  To read the 
fault code on the secondary display, refer to Section 4.7 on fault codes. 
Press KEYLOCK. 
This will clear current fault code.  Note: If Keylock is pressed again, the 
previous fault code will be cleared.  Pressing Keylock also toggles the wash 
icons on the LCD on and off. 
Press POWER to exit.