Furuno gp-31 Manuel D’Utilisation
2-3
Figure 2-7 Track recording
method selection window
5. Select OFF, DISTANCE or AUTO and
then press the [ENT] key.
OFF: Track is neither recorded or plot-
ted. This setting is useful when you do
not need to record track, for example,
when returning to port.
DISTANCE: Track is recorded and plot-
ted at the distance interval set.
AUTO: Plotting and recording interval
changes with chart scale selected.
ted. This setting is useful when you do
not need to record track, for example,
when returning to port.
DISTANCE: Track is recorded and plot-
ted at the distance interval set.
AUTO: Plotting and recording interval
changes with chart scale selected.
If you selected DISTANCE, enter the re-
cording interval as follows:
cording interval as follows:
a) Press the [ENT] key.
b) Press
b) Press
or
to select digit to
change.
c) Press
▲
or
▼
to change value.
d) Press the [ENT] key after setting.
6. Press the [MENU] key twice to finish.
2.6 Erasing Track
All track can be erased. Track cannot be
restored once erased, therefore be abso-
lutely sure you want to erase all track.
restored once erased, therefore be abso-
lutely sure you want to erase all track.
1. Press the [MENU] key once or twice to
display the menu.
2. Select ERASE and press the [ENT] key
to display the ERASE menu.
Figure 2-8 ERASE menu
3. Select “TRACK?” and press the [ENT]
key. The message shown in Figure 2-9
appears.
appears.
Figure 2-9 Prompt for erasure of track
4. Press the [ENT] key to erase all track.
5. Press the [MENU] key twice to finish.