Navigon 3110 Manuel D’Utilisation

User’s manual NAVIGON 3100 | 3110 

Operating the navigation software 

- 9 -  

 

No Signal: Data is being received from less than three satellites. The 
position cannot be calculated. 

 

GPS Ready: Data is being received from at least three satellites. The 
position can be calculated. 

 

Refer to chapter "GPS status" on page 33 for detailed information 
regarding the GPS status. 

 

The Energy symbol can display the following states of the built—in 
battery: 

 

The device is being supplied by an external power source. The battery 
is being charged. 

 

The device is being supplied by its internal battery. The battery charge 
is sufficient. 

 

The device is being supplied by its internal battery. The battery charge 
is low. 

The Direction symbol shows you in which direction you are currently 
moving. It can show the following points of the compass: 
N, NE, E, SE, S, SW, W, NW. 

If your device has an integrated TMC receiver, or if you have connected 
an external TMC receiver, the navigation system will have the latest 
traffic information available. If required, it can dynamically change your 
route, e.g. avoid a traffic jam. 
The TMC symbol can display the following TCM states: 

 

No Symbol: There is no TMC receiver connected, or the connected or 
installed TMC receiver is not working. 

 

Tuning: The TMC receiver is operational but cannot find a transmitter 
that is sending TCM signals. 

 

TMC on Standby: Traffic messages can be receiverd.