Linksys WVC54G Manuel D’Utilisation

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

1

2

A

Attach the antenna.

B

Connect the included Ethernet 

network cable to your router, 

switch, or computer.

C

Connect the other end of the 

cable to the Ethernet port on 

the Camera.

D

Connect the included power 

adapter to the Power port on 

the Camera. 

E

Plug the power adapter into 

an electrical outlet.

The Ready LED flashes while 

the Camera is initializing. When 

the Camera is ready for setup, 

the Ready and Ethernet LEDs 

are solidly lit.

F

Enter a unique name for the 

Camera in the Camera Name 

field, and complete the 

Description field. Select your 

time zone, and enter the date 

and time. Then click Next.

G

If your network has a router or 

other DHCP server, select 

Automatic Configuration-

DHCP. If the Camera requires a 

static IP address, keep the 

default setting, Static IP 

address.

Click Next.

H

If you selected Automatic 

Configuration-DHCP in step G, 

then proceed to step I. 

If you selected Static IP 

address, the IP Settings screen 

will appear. Enter an IP 

Address, Subnet Mask, and 

Default Gateway appropriate 

for your network. You must 

specify an IP Address and 

Subnet Mask. If you are unsure 

about the Default Gateway, 

then leave this field blank. 

Complete the Primary DNS 

and/or Secondary DNS fields. 

Enter at least one DNS address, 

which you can obtain from 

your ISP. Click Next.

A

H

C

G

A

Insert the Setup CD-ROM into 

your CD-ROM drive. The Setup 

Wizard should run 

automatically, and the 

Welcome screen should 

appear. If it does not, click 

Start and then Run. In the field 

provided, enter D:\wvc54g.exe 

(if “D” is the letter of your CD-

ROM drive).

B

Click Setup to begin the setup 

process.

C

Make sure the Camera is 

properly connected to your 

network. Click Next.

D

The screen will display a list of 

Wireless-G Internet Video 

Cameras on your network and 

status information. In the 

Selection box, click the name 

of the Camera you are 

currently installing. Click Next.

E

A verify password screen will 

appear. In lowercase letters, 

enter admin in the 

Administrator Name and 

Password fields. Click OK.

 The default IP address of the 

Camera is 192.168.1.115.

 If you want to connect the 

Camera to a wireless network for 
setup, refer to the User Guide on the 
Setup CD-ROM for instructions.

You MUST connect the 

Camera to a router, switch, or PC* using 
an Ethernet network cable BEFORE 
powering on the Camera. Otherwise, the 
Camera will not function.

D

C

D

E

• Wireless-G Internet Video Camera
• Camera Desktop Stand
• Detachable Antenna
• Power Adapter
• Ethernet Network Cable
• Setup CD-ROM with User Guide
• User  Guide  on  CD
• Quick Installation Guides
• Sololink DDNS Free Trial Card

F

*  If connecting the Camera directly to a PC, Linksys recommends that you 

use an IP address of 192.168.1.x (x can be any number from 1-254, but 

cannot be the same as another device on your network).

 If your LAN IP address is 

different than 192.168.1.x, you 
may get an error message when 
you configure the camera through 
your PC.  Ignore the error message.

GHz

2

4

,