Namco Bandai Games 90500146 Manuel D’Utilisation
Page 39
4-3
Fitting the Header Assembly
l
The Header Assembly has a forward centre of gravity, so it is important that
at least two people are used to fit or remove the Header Assembly.
l
The fitting position of the Header Assembly is high, and it is important that
a means of reaching the height safely, without stretching, is available. (e.g.
Steps, Step Stool etc.)
1.
Place the Header Assembly on to the Monitor Cabinet and slide the Header Assy
backwards ensuring that the Header Assy engages in the Retaining Brackets on
the top of the cabinet,.
3.
Fit 4off security screw (M5x25), with flat washer, to retain the Header Assy to the
Monitor Cabinet.
4.
Remove 2off security screw (M5x12) and remove the Connector Cover.
5.
Connect the connector, and refit the Connector Cover with the 2off security
screws (M5x12)
Washer (M5x16x1)
Header Assy
Retaining Bracket
Monitor L Assy (front)
Monitor R Assy (front)
Security screw (M5x25)
Security screw (M5x12)
Connector
Connector Cover