Nilfisk sdm 43-900 Manuel D’Utilisation

  

The operation of the single-disc machine is subject to 

the currently valid national regulations.

It is essential to observe not only the operating 

instructions and the binding regulations on accident 

prevention valid in the country of use, but also the 

generally acknowledged rules for safe and correct 

working procedures. No methods involving safety risks 

must be employed. The use of automatic machines on 

public paths and roads is prohibited.

All single-disc machines are intended exclusively for 

use in building interiors. 

Any use beyond this is considered incorrect. The 

manufacturer accepts no liability for any resultant 

damage; the user alone bears the risk.

Correct use also includes adherence to the 

operating, servicing and maintenance conditions 

recommended by the manufacture.

The relevant accident prevention regulations as well as 

all the generally acknowledged safety and working 

practices must be followed.

Unauthorized modifications to the machine exclude 

the manufacturerʼs liability for resultant damage.

Before machine use, floorcoverings must be tested for 

suitability for this cleaning process.

Pay attention to the area compression of point-elastic 

floors, e.g. in gymnasiums

The manufacturer accepts no liability for damage to 

equipment and to the floor being cleaned from 

using the wrong brushes and cleaning agents.

The operatorʼs attention is drawn explicitly to the 

fact that the machines may only be used for their 

intended purpose. If the machines are not used for 

their intended purposes, the user must accept full 

responsibility. Any liability of the manufacturer ist thus 

excluded.

When the machine is stationary, the brush unit must 

be immediately switched off to prevent damage to 

the floorcovering.

During transportation in lifts, the currently valid 

user instructions and safety regulations – and 

particularly those concerning maximum loading 

– must be observed.

The machine operation position is behind the machine.

The single-disc machine may only be serviced 

and repaired by persons with technical and legal 

authorization.

When using cleaning and care agents, the 

manufacturerʼs danger warnings must be followed 

and protective goggles and clothing must be worn.

Only muse low-foaming, non-combustible cleaning 

agents which do not contain generally health-

hazardous substances.

1.  Handle bar

2.  Brush motor switch

3.  Housing of top shaft element

4.  Swith lock

5.  Shaft adjustment handle

6.  Screws on switch cabinet

7.  Bar

8.  Cable hook

9.  Wheels

10. Motor head

11. Brush

12. Outlet hose

13. Liquid tank

14. Tank holder

15. Tank lever

16. Water connector

17. Shaft adjustment unit

18. Electric cable

19. Drive plate for pads

20. Spraymaster

21. Pad

1.   Please familiarize yourself with the instructions and 

recommendations contained in these operating 

instructions before setting up, commissioning and 

servicing the machine.

2.   You will then have full control over the machine 

and use it efficiently. The care and maintenance 

described in these operating instructions are in 

the interests of your own safety and preserve the 

machineʼs value.

3.   The manufacturer accepts no liability for personal 

injury or damage to property due to the incorrect 

use of this machine.

Please read the safety instructions carefully!

Before commissioning the single-disc machine, please 

read these instructions carefully and keep them handy 

at all times. 

The single-disc machine may only be used by persons 

trained in its use and explicitly entrusted with its 

operation. 

The single-disc machine is not suitable for cleaning 

surfaces which release health-hazardous dusts and 

liquids. Do not use the machine on steps.

Never drive the machine over electric cables. Danger of 

electric shocks!