Konica Minolta micropress release 6 Manuel D’Utilisation

Default calibration sets provide the lin-

earization needed for most work. When 

modifying or creating a calibration set, 

create a 1:1 response. To vary final out-

put from 1:1, use a Tone Curve. Before 

modifying an existing calibration set or 

Tone Curve, copy it from the Calibra-

tion Manager dialog and edit the copy. 

To create a new calibration set, you 

must print a calibration set target. Fol-

low the instructions in the Print Calibra-

tion section. Since Tone Curves 

represent the % deviation from a 1:1 

response, enter their values manually.

Device

Selects device. To edit/create Tone Curves, select "Tone Curves."

Color Space

Selects color space for the curve.

Name

Name of the curve.

Resolution

Resolution of the virtual printer (sets warning criterion)

Dot shape

Dot shape acceptable for use with the curve. "(Any)" means the curve will work with all dot 
shapes (sets warning criterion).

Freq.

Lpi range for which the curve is considered accurate (sets warning criterion).

Exp.

Not applicable for MicroPress devices.

+/-

Not applicable for MicroPress devices, set Use for Pos & Neg to "Y" (sets warning 
criterion).

Profile

ICC profile associated with the device and curve (sets warning criterion)

Status

Not applicable for MicroPress devices.

Edit from uncalibrated target

Edits existing calibration set or Tone Curve.

Edit from calibrated target

NOT RECOMMENDED FOR USE. If saved, will delete all data from selected calibration set 
or Tone Curve.

New

Creates a new calibration set or Tone Curve.

Copy

Copies a selected calibration set or Tone Curve.

Delete

Deletes a selected calibration set or Tone Curve.

Select

Displays the selected calibration set in the Edit Page Setup dialog. If you opened the 
Calibration Manager from this dialog, click the Select button to save changes.

OK

Saves and exits.

Cancel

Exits without saving.