Kenwood KDC-C662 Manuel D’Utilisation
8
PROBLEM
POSSIBLE CAUSE
SOLUTION
Sound skips due to vibration.
The disc changer mode cannot
be selected.
be selected.
• The unit is mounted at a slant.
• Changer unit is mounted in an
• Changer unit is mounted in an
unstable place.
• The angle adjustment switches are
set improperly.
The O-N selection switch of the disc
changer is not set properly.
changer is not set properly.
• Mount the unit so that is level.
• Mount the unit in a stable place.
• Mount the unit in a stable place.
• Set the angle adjustment switches to
the correct positions.
Set the O-N selection switch to "O"
position.
position.
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do not forget to
attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport screws are not
attached.
attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport screws are not
attached.
Troubleshooting Guide
Specifications
Laser diode ..........................GaAlAs (
λ
=780 nm)
Digital Filter ......................8 Time Over Sampling
D/A Converter ..............................................1 bit
Spindle speed ....................500 ~ 200 rpm (CLV)
Wow & Flutter ..............Below Measurable Limit
Frequency Response (±1 dB) ........5 Hz ~ 20 kHz
Total harmonic distortion (1 kHz)............0.005 %
Signal to Noise Ratio ..................................94 dB
Dynamic range ..........................................94 dB
Channel separation ....................................85 dB
D/A Converter ..............................................1 bit
Spindle speed ....................500 ~ 200 rpm (CLV)
Wow & Flutter ..............Below Measurable Limit
Frequency Response (±1 dB) ........5 Hz ~ 20 kHz
Total harmonic distortion (1 kHz)............0.005 %
Signal to Noise Ratio ..................................94 dB
Dynamic range ..........................................94 dB
Channel separation ....................................85 dB
Operating voltage ....14.4 V (11 ~ 16 V allowable)
Current consumption ........0.8 A at Rated power
Dimensions (W
Current consumption ........0.8 A at Rated power
Dimensions (W
×
H
×
D)
(KDC-C712) ......................250
×
80
×
176 mm
(KDC-C662/C462) ............250
×
64
×
176 mm
Weight
(KDC-C712)............................................2.0 kg
(KDC-C662/C462) ..................................1.8 kg
(KDC-C662/C462) ..................................1.8 kg
Specifications subject to change without notice.