Konica Minolta pi6000 00-gb Manuel D’Utilisation
Before Using the Pi6000
2
Pi6000
2-3
2.2
Connecting the Pi6000
The Pi6000 can be mounted to the rear of the Di620 and connected with
an SCSI cable. Mounting and connection must be carried out by service
personnel. Similarly, service personnel should be contacted when you
want to disconnect them.
an SCSI cable. Mounting and connection must be carried out by service
personnel. Similarly, service personnel should be contacted when you
want to disconnect them.
Once installed, a computer can be connected to the Pi6000 with a
standard printer cable or the Pi6000 can be connected to a network. Since
the power cable for the Pi6000 is separate from the one for the Di620, they
must both be connected to different power sources.
standard printer cable or the Pi6000 can be connected to a network. Since
the power cable for the Pi6000 is separate from the one for the Di620, they
must both be connected to different power sources.
CAUTION
Ð
Do not connect any SCSI devices such as a personal computer’s
peripheral devices to the SCSI cable used to connect the Pi6000 and
Di620.
peripheral devices to the SCSI cable used to connect the Pi6000 and
Di620.
NOTE
If you cannot print from your computer, check whether the power
cables are properly connected to appropriate AC outlets and the SCSI
and printer cables are connected to the correct connectors.
cables are properly connected to appropriate AC outlets and the SCSI
and printer cables are connected to the correct connectors.