Konica Minolta pi6000 00-gb Manuel D’Utilisation
11
Status Monitor
11-12
Pi6000
11.9
Monitoring Interval Dialog Box
This dialog box is opened by clicking the
INTERVAL
button on the toolbar
or by selecting
MONITORING INTERVAL
from the Settings menu. Specify
the communication timeout and display update conditions.
Timeout for Networking
Determine the time to display an error when there is no response from the
network.
network.
An error is displayed if no timeout is set.
Monitoring Interval
Determine the communication interval for checking the printer’s status
and updating the Status Monitor. This setting must be a value greater than
the number of people using the network simultaneously times 10 seconds.
If the setting is lower than this value, errors may occur.
and updating the Status Monitor. This setting must be a value greater than
the number of people using the network simultaneously times 10 seconds.
If the setting is lower than this value, errors may occur.
NOTE
The next print Status can be obtained soon after the current printing
job is performed when a local connection is used. However, some
additional time is required when a network connection is used.
job is performed when a local connection is used. However, some
additional time is required when a network connection is used.