Konica Minolta pi6000 00-gb Manuel D’Utilisation
Installing the Windows 95 Printer Driver
3
Pi6000
3-11
“Details” Properties File
This property file allows you to select the port to which the Di620 is
connected or set the timeout error display conditions. To display the
“Details” properties file, click the “Details” tab in the “Minolta Di620
Properties” dialog box.
connected or set the timeout error display conditions. To display the
“Details” properties file, click the “Details” tab in the “Minolta Di620
Properties” dialog box.
1
Port
Used to select the output port. Select the port to which
the Di620 is connected with a printer cable.
the Di620 is connected with a printer cable.
2
Add Port
Used to add a port. If your computer is connected to a
network or when a port (hardware) is added, use this
button to add a port.
network or when a port (hardware) is added, use this
button to add a port.
3
Delete port
Used to delete a port. When a port becomes
unnecessary as a result of change of the connecting
method, use this button to delete the port.
unnecessary as a result of change of the connecting
method, use this button to delete the port.
4
Printer Driver
Displays the currently selected printer driver. If the
printer driver is changed from one to another, the
property contents will also change.
printer driver is changed from one to another, the
property contents will also change.
5
New Driver
Used to install a new printer driver.
6
Capture Printer Port
Used to assign LPT1 as the network port if the Di620 is
connected via a network. This option must be used only
when a 16-bit application program that allows output to
only LPT1 is used to output data to a printer port on the
network. Normally, 1 Port is used to designate a printer
port on the network.
connected via a network. This option must be used only
when a 16-bit application program that allows output to
only LPT1 is used to output data to a printer port on the
network. Normally, 1 Port is used to designate a printer
port on the network.
7
End Capture
Used to cancel the network printer port which has been
assigned using 6 Capture Printer Port.
assigned using 6 Capture Printer Port.
8
Timeout setting:
Not selected
Not selected
Used to set the wating time (in seconds) until the Di620
is put online. An error message will appear if the Di620
is not put online even though the time set here has
expired.
is put online. An error message will appear if the Di620
is not put online even though the time set here has
expired.
1
2
3
4
5
6
7
8
9
10
11