Konica Minolta pi6000 00-gb Manuel D’Utilisation
Printing from Windows 95
4
Pi6000
4-23
4.9
Binding Pages After Printing
Using the finisher function of the Di620 enables stapling and hole
punching at the end of printing. This section explains how to set the
number of copies to be printed, stapled or punched.
punching at the end of printing. This section explains how to set the
number of copies to be printed, stapled or punched.
1
Start printing from the application which was used to create the
document. Normally, printing can be started by selecting “Print” from
the “File” menu.
document. Normally, printing can be started by selecting “Print” from
the “File” menu.
2
The Print dialog box will appear. Check that “Minolta Di620” is
displayed for “Name” and click the
displayed for “Name” and click the
PROPERTIES
button.
NOTE
Some applications allow you to set Copies and Collate (Sort) in the
Print dialog box. However, to ensure proper printing, set those items
of the application to OFF and make the necessary settings in each
property file of the printer driver.
Print dialog box. However, to ensure proper printing, set those items
of the application to OFF and make the necessary settings in each
property file of the printer driver.
3
The “Minolta Di620 Properties” dialog box will appear.
If the “Setup” properties file is not displayed, click the “Setup” tab. In
“Copies”, select the number of copies to be printed. Check that
appropriate settings are made for other items such as “Paper Size”.
If the “Setup” properties file is not displayed, click the “Setup” tab. In
“Copies”, select the number of copies to be printed. Check that
appropriate settings are made for other items such as “Paper Size”.
Print data
Printout