Konica Minolta pi6000 00-gb Manuel D’Utilisation
1
CE Marking (Declaration of Conformity)
1-2
Pi6000
CAUTION
This device must be used with shielded interface cables. The use of
non-shielded cables is likely to result in interference with radio
communcations and is prohibited under EC Directive rules.
non-shielded cables is likely to result in interference with radio
communcations and is prohibited under EC Directive rules.
EC-01
1.1
Compliance (U.S.A. Only)
WARNING
Ð
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Ð
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at his own expense.
harmful interference in which case the user will be required to correct
the interference at his own expense.
Ð
The design and production of this unit conforms to FCC Regulations,
and any changes or modifications must be registered with the FCC
and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.
and any changes or modifications must be registered with the FCC
and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.
FCC-02
This device must be used with shielded interface cables. The use of non-
shielded cables is likely to result in interference with radio
communications and is prohibited under FCC rules.
shielded cables is likely to result in interference with radio
communications and is prohibited under FCC rules.
FCC (EMC)-01