Konica Minolta pi6000 00-gb Manuel D’Utilisation
Installing the Windows NT 4.0 Printer Driver
6
Pi6000
6-9
6.4
Making General Settings Before Printing
In addition to job-specific settings such as paper size, the printer driver
also lets you control general settings like the port to which the printer cable
is connected and other optional items. You can change these settings
after installing the driver or any time your operating environment changes
by using the various tabs located in the Pi6000 Properties window.
Installing the printer driver causes Properties to be automatically set to
defaults that are applicable for most general printing needs. Normally you
can use these initial default settings without changing them. The following
table shows where you should go in the Properties window to make
specific settings.
also lets you control general settings like the port to which the printer cable
is connected and other optional items. You can change these settings
after installing the driver or any time your operating environment changes
by using the various tabs located in the Pi6000 Properties window.
Installing the printer driver causes Properties to be automatically set to
defaults that are applicable for most general printing needs. Normally you
can use these initial default settings without changing them. The following
table shows where you should go in the Properties window to make
specific settings.
Printer Properties Settings
For full details on each of the settings that appear on the tabs in the
Pi6000 Properties window, contact your network administrator and
see the documentation that comes with Windows NT.
Pi6000 Properties window, contact your network administrator and
see the documentation that comes with Windows NT.
To display Pi6000 Properties, go to the Printers window, right-click the
Minolta Pi6000 icon, and then click “Properties” on the menu that appears.
Minolta Pi6000 icon, and then click “Properties” on the menu that appears.
Cases where changes are necessary
Setting/Properties Window Tab
l
To add comment text to distinguish the Di6000 Image
Controller from other printers.
Controller from other printers.
GENERAL
l
To change the port specification.
l
To change timeout error conditions.
l
To change the port to which the Pi6000 Image
Controller is connected to a network. (This setting is
available only when the Pi6000 Image Controller is
connected to a network.)
Controller is connected to a network. (This setting is
available only when the Pi6000 Image Controller is
connected to a network.)
PORTS
l
To specify a time frame for Di620/520 Copy Machine
operation.
operation.
SCHEDULE
l
To share the Pi6000 Image Controller with other
computers on the same network. (This setting is
available only when the Pi6000 Image Controller is
connected to a network.)
computers on the same network. (This setting is
available only when the Pi6000 Image Controller is
connected to a network.)
SHARING
l
To restrict access to the Di620/520 Copy Machine.
l
To check the accounts of Di620/520 Copy Machine
users.
users.
SECURITY
l
To switch the display of the Print Status Window on
and off.
and off.
PROCESSING
l
To specify installation of the C-304 Cassette, a hard
disk, or other options on the Di620/520 Copy
Machine.
disk, or other options on the Di620/520 Copy
Machine.
l
To make Finisher settings.
DEVICE OPTION