VTech dect 6.0 cs6219-2 Manuel D’Utilisation

2

When the screen shows 

LOW BATTERY, the backlight is off.

If the handset will not be used for a long time, disconnect and remove the 

battery to prevent possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com 

or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 

267-7377.

Install the battery as shown below. After installing the battery, you might 

be able to make and receive short calls. For best performance, charge the 

handset for at least 16 hours before use. When not in use, place the handset in 

the telephone base or charger. See page 6 for battery operating times.

Battery indicators

Battery status

Action

The screen is blank.

Battery has no charge and 

the handset cannot be 

used.

Charge until the screen shows 

LOW BATTERY (at least 10 

minutes).

The screen shows 

and   flashes.

Battery has very little 

charge and the handset 

cannot be used.

Charge until the screen shows 

LOW BATTERY (about four 

minutes).

The screen shows 

LOW BATTERY, 

 flashes, and the 

handset beeps.

Battery has enough charge 

to be used for a short time.

Charge until the screen shows 

HANDSET X (about one hour).

The screen shows 

HANDSET X.

Battery is charged.

To keep the battery charged, 

place it in the telephone base 

or charger when not in use.

If the battery compartment cover is on the handset, press the indentation 

and slide the cover to remove.
Plug the battery securely into the plug inside the handset battery 

compartment, matching the color-coded label.
Place the battery with the label 

THIS SIDE UP facing up and the wires 

inside the battery compartment.
Align the cover flat against the battery compartment, then slide it towards 

the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The 

CHARGE light is on when the handset charges.

1.

2.

3.

4.

5.

1

2

3

4

CHARGE light

5