Hobart LXiGH ML-130019 Manuel D’Utilisation
– 4 –
Installation, Operation and Care of
LXi SERIES DISHWASHERS
SAVE THESE INSTRUCTIONS
GENERAL
The LXi Series dishwashers are fully automatic, front-loading dishwashing machines that are capable
of 30 racks per hour.
of 30 racks per hour.
All LXi Series dishwashers shut down automatically 4 hours after last use to conserve energy.
All LXiH and LXiGH dishwashers include
Sense-A-Temp
TM
to insure proper hot water temperature
during rinse.
Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, fill hose and drain
hose.
hose.
MODEL
DESCRIPTION
LXiC
Fresh water rinse; low-temperature, chemical-sanitizing models for use
with 6% sodium hypochlorite solution (bleach) as the sanitizing agent.
Note: If 8.40% bleach is to be used, contact Hobart Service to change the
sanitizer pump settings. (Charges will apply)
with 6% sodium hypochlorite solution (bleach) as the sanitizing agent.
Note: If 8.40% bleach is to be used, contact Hobart Service to change the
sanitizer pump settings. (Charges will apply)
LXiH
Fresh water rinse with a built-in 70
°
F rise booster heater. This allows an
incoming water temperature of 110
°
F.