VTech dect 6.0 ds6222-4 Manuel D’Utilisation

4

Your telephone base is ready for tabletop use. If you want to mount your

If you want to mount your 

telephone on a wall, use the provided wall bracket to connect with a standard 

dual-stud telephone wall mounting plate. If you do not have this mounting 

plate, you can purchase one from many hardware or consumer electronics 

retailers. You might need a professional to install the mounting plate.

Position the telephone base as shown below. Insert the extended tabs 

(marked 

B) of the wall bracket into the slots on the back of the telephone 

base (marked 

B). Push the telephone base down until it is securely in place.

If you are using a DSL filter, plug the line cord into the filter now. Route the 

telephone line cord (or DSL filter) through the wall bracket hole. Route the 

power cord out of the bottom of the telephone.
Plug the telephone line cord (or DSL filter) into the wall jack. Plug the 

power adapter into a power outlet not controlled by a wall switch.
Align the holes on the bracket with the standard wall plate and slide the 

bracket down until it locks securely. Bundle the telephone line cord and 

power adapter cord neatly with a twist tie.

1.

2.

3.

4.

1

2

3

4