eutech-instruments cyberscan con 11 conductivitytds meter Manuel D’Utilisation

Instruction Manual 

 

CON 11/110 

 

63

After matching the Communication Settings between your computer using Data 
Acquisition program and the CON 110 meter, you can now capture data into your 
computer for analysis and storage purposes. 

1.  Ensure the 1-meter RS232 communication cable (Refer to Accessories 

Section) is connected between the computer and the CON 110 meter’s Com 
port. Refer to section 3.6 “Connecting the RS232C Cable (Only for CON 
110)”, page 9, for connection procedure. 

2.  Switch on the CON 110 meter and run the Data Acquisition software. 
3.  Click “ENABLE CONNECTION” button. 
4.  With the CON 110 meter switched on, press the PRINT key to send data to 

the computer. 

5.  You can use MODE key on the meter and change to other parameter such 

as TDS and print data accordingly. 

6.  You can also check off the Time Stamp function, so as to print without the 

Time and Date information. 

7.  You can click Clear Readings button to begin another set of measurements, 

or click Save Readings to store readings for future retrieval.