eutech-instruments ecoscan do 6 do meter Manuel D’Utilisation

Instruction Manual 

DO 6 

 
 

9

 

1)  Insert the BNC connector from the electrode to the BNC connector socket 

on the meter accordingly and rotate connector clockwise until it locks. See 
Figure below.  

2)  To remove, simply rotate the connector in counter-clockwise direction until 

it unlocks, and slide the connector off the socket. 

3)  Plug the phono jack of temperature sensor into the phono socket of the 

meter as shown in Figure below.  

Caution: Do not pull or force the probe cord or the probe wires might 
disconnect. 

Note: Keep connectors clean. Do not touch connector with soiled hands. 

BNC Connector for 
DO probe

Phono jack for 
Temperature probe