eutech-instruments ecoscan do 6 do meter Manuel D’Utilisation

Instruction Manual 

DO 6 

 
 

41

 

This parameter shows the sensor’s mV output corresponding to 100% 
Saturation.  

From Step 5 above, 

6)  Press the HOLD/ENTER key. The display will show “HI.mV” momentarily 

before displaying the sensor’s mV output value with respect to 100% 
Saturation.  

This parameter lets you view the sensor’s mV output corresponding to 0% 
Saturation.  

From Step 6 above, 

7)  Press the HOLD/ENTER key. The display will show “LO.mV” momentarily 

before displaying the sensor’s mV output value with respect to 0% 
Saturation.  

8)  Press the HOLD/ENTER key again to exit to the main group menu. Press 

CAL to return to the measurement mode. 

Note: To view the electrode properties in the mg/L (ppm) Concentration mode, 
repeat the whole steps above using the mg/L (ppm) Concentration Set Up 
menu. Viewing of the % Saturation Offset will be skipped in this menu.